|
District Ordinances and Rules require
that all new construction and/or an
extensive renovation with a value of
$10,000.00 or greater be fully inspected
by the District's licensed plumbing
inspector and conform to The
International Plumbing Code. The
district currently contracts all
plumbing inspections with a fully
licensed inspector on a contractual
basis.
Additionally, the district requires that
all Home Builders and Remodelers that
build and/or remodel residential or
commercial buildings within the district
register with the
"Texas Residential Construction
Commission" and submit copies of all
construction inspection reports to the
district office upon completion.
Important Note:
All Builders and Remodelers are
responsible for setting up appointments
with the District's plumbing inspector at
least 2 days in advanced. The District's
inspector may be contacted at:
Mr. Kenneth
Horrell
Office
Cell: (903) 241-4746
Home
Phone: (903) 525-9138
Office
Email:
khorrell@tylertexas.com
Home
Email:
khorrell@suddenlink.net
Mr. Horrell is a
fully licensed building inspector by the
State of Texas. He is licensed to perform all
building inspections required by the
following:
1) Texas
Commission on Environmental Quality
2) Texas
Residential Construction Commission
3)
Emerald Bay
Municipal Utility District
There are three (3) plumbing inspection
steps required to complete the
inspection process. They are Plumbing Rough-In, Plumbing Top-Out,
and Plumbing Final. At the end
of each inspection step, the inspector
will either certify the particular step
as complete or contact the appropriate
person to bring the project into
compliance with the particular code
violation. Once all compliance issues
are resolved, the inspector will
deliver to the district office the
completed inspection form for the
particular step. A copy of the completed
form will be delivered by mail to the
Builder and/or Remodeler by the District
office. The original will be kept on
file in the District office.
The approved Emerald Bay Municipal
District Inspection forms are at the
links below:
1)
Plumbing Rough-In
Inspection Report
2)
Plumbing Top-Out
Inspection Report
3)
Plumbing Final
Inspection Report*
*Please note that
The Plumbing Final
Inspection Report must be accompanied by a
completed Customer Service Inspection
Report and the required Backflow Test
and Maintenance Report.
The approved Emerald Bay Municipal
District Customer Service Inspection
Report and Backflow Test and
Maintenance Reports are at the links
below:
1)
Customer Service Inspection Report
2)
Backflow Test and Maintenance Report
If you have any questions regarding
this process or any other issue, please
feel free to contact a
district officer directly.
|